grinders

FLOOR GRINDERS

Package 1:
Inspect for proper operation, clean inside the inverter box, inspect heads.

Package 2 - Same as package 1 plus:
Check motor amperage, check electrical connections at the machine and on machine cord, replace all head bolts, springs, and grommets, replace the hoses on the machine.

Package 3 - Same as package 1 and 2 plus:
New bearings, belts, seals, hubs depending on condition and check parameters to make sure they are within spec.


 

vacuums

INDUSTRIAL VACUUMS

Package 1:
Clean hepa filters and sock filters, check for proper operation.

Package 2 - Same as Package 1 Plus:
Inspecting electrical connections, cleaning inside electrical panel, inspecting machine cord.

Package 3 - Same as Package 1 & 2 Plus:
Replacing hepa and sock filters, check amperage on motor, check parameter settings, and replace casters.


 

poly-pumps

POLY PUMPS

Package 1:
Completely flush machine with a chemical cleaner which will remove hardened material from the pumps, lines, and manifold, check for proper operation and when finished we pump hydraulic fluid through the machine to keep anything from hardening before you receive the machine.

Package 2 - Same as Package 1 Plus:
We will adjust chain or belt to factory spec, grease the manifold, inspect electrical connections, and hydraulic lines.

Package 3 - Same as Package 1 & 2 Plus:
Inspecting hydraulic pumps for wear, clean machine and put a fresh coat of paint on it, new stainless steel braided hydraulic lines and manifold.


 

burnishers

BURNISHERS

Package 1:
Change engine oil and filter, change air filter, inspect operation.

Package 2 - Same as Package 1 Plus:
Same as package 1 plus change spark plugs, tighten belt to factory spec, inspect all hoses and replace as needed.

Package 3 - Same as Package 1 & 2 Plus:
Same as package 1 and 2 plus replace belt, replace carburetor, replace all hoses, and replace hub bearing.


 

autoscrubbers

AUTO SCRUBBERS

Package 1:
Clean the recovery tank, float sensor, inspect squeegee, inspect scrub brushes, and check operation.

Package 2 - Same as Package 1 Plus:
Same as package 1 plus cleaning battery terminals and cables, check trans-axle level and top off as needed, grease rear casters, replace skirt around heads, replace squeegee.

Package 3 - Same as Package 1 & 2 Plus:
Same as package 1 and 2 plus checking battery state of charge and replacing as needed, replace head brushes, check the carbon brushes in the electric motors.


 

twisters

TWISTERS

Package 1:
Check engine oil level, engine coolant, and hydraulic oil and top off all as are needed. Clean radiator cooling fins and hydraulic oil cooler fins. Inspect hydraulic hoses and propane hoses for leaks and fix as needed.

Package 2 - Same as Package 1 Plus:
Torque the wheel hub nuts and lug bolts. Grease pivot areas and inspect and tighten joystick steering linkages.

Package 3 - Same as Package 1 & 2 Plus:
Change hydraulic oil and filter. Replace engine air filter. Change spark plugs and wires. Change engine coolant.